Installation Guide

ManualsBrandsDreamLine ManualsKitchenAqua 60 in. x 74-3/4 in. Hinge Shower Door in Chrome with Right Hand Drain Base

Rev 2.2

AQUA

SHOWER / TUB DOOR INSTALLATION INSTRUCTIONS

IMPORTANT

DreamLine

reserves the right to alter, modify or redesign products at any time without

prior notice. For the latest up-to-date technical drawings, manuals or any other details

please refer to the support.BathAuthority.com

web page.

Please carefully read the instructions before installing. If you have any questions regarding

installation, please call our technical support specialists Monday through Friday 9:00 AM –

5:00 PM EST at 1-866-731-8378, ext. 3 or e-mail our technical support group at

support@BathAuthority.com.

For more information on DreamLine

Shower Door and Tub Door please visit www.BathAuthority.com

Summary of content (13 pages)

PAGE 1
AQUA SHOWER / TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals or any other details please refer to the support.BathAuthority.com web page. Please carefully read the instructions before installing.
PAGE 2
Preparation 1. After opening all boxes and packages, read this introduction carefully. Check that all of the needed parts are included in the package, by marking all the components on the “Detailed Diagram of Shower/Tub Door Components”. Examine boxes and packages for shipping damage. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date.
PAGE 3
Detailed Diagram of Tub Door Components 1a 1b 7 8 9 3 10 2 4 5 11 12 6 13 14 Packing List 01a 01b 02 03 04 05 06 07 Wall profile (External) Wall profile (Internal) Stationary glass Support bar Hinge Glass door Handle Wall anchor 1pc 1pc 1pc 1pc 2pcs 1pc 1pc 5pcs 08 09 10 11 12 13 14 15 Decorative plug Countersunk screw ST4.2×15 Round head screw ST4.
PAGE 4
Shower/Tub Door Installation 1. Place the Wall profile (External) (01a) to the wall above the Shower base or Tub and level it vertically. See Fig. 1 for details. Fig. 1 2. Mark the drilling holes on the wall through the holes in the Wall profile (External) (01a). Place the Wall profile (External) aside, drill the holes using Ø5/16” drill bit and insert the Wall anchors (07). Apply silicone caulk along the wall profile and around the holes on the wall.
PAGE 5
3. Push U-Shape seal gasket (13) over the vertical edge of the Stationary glass (02). Place the Stationary glass with attached U-Shape seal gasket onto the Shower base and slide it into the Wall profile (External) (01a). Attach the Wall profile (Internal) (01b) to the Wall profile (External) and the Stationary glass using Countersunk screws ST4.2×15 (09). Level the Stationary glass vertically and fasten the screws. 1 3 2 4 See Fig. 3 and Fig. 4 for details. Fig. 3 Fig. 4 Rev 2.
PAGE 6
1 4. Take apart the Bottom bracket (14), place the mounting part into the U shape hole on the Stationary glass (02) from inside and mark the drill hole on the threshold, tray or bathtub. Remove the glass, drill the hole using Ø1/8” drill bit and secure the mounting part of the Bottom bracket with Round head screw ST4.2×30(10). 3 Ø1/8" 2 See Fig. 5 for details. 4 Fig. 5 5. Place the Stationary glass (02) back into the Wall profile. Assemble the Bottom bracket (14).
PAGE 7
Fig. 7 6. Mark the hole for the Support bar (03) on the wall according to the measurements. See Fig. 8 for details. /4" 5/8" 43 Fig. 8 Rev 2.
PAGE 8
1 7. Drill the hole in the wall using Ø5/16” drill bit and insert Wall anchor (07). Remove the bracket from Support bar (03) and attach it to the wall with Round head screw ST4.2×30(10). 3 Ø5/16" See Fig. 9 for details. 2 Fig. 9 8. Place the Support bar (03) with channel on the Stationary glass (02) and insert the other end into the bracket. Tighten the set-screws provided at both ends of the Support bar (03). 1 3 See Fig. 10 and Fig. 11 for details.
PAGE 9
Fig. 11 9. Install the Hinges (04) on the Stationary glass (02) with the decorative non-screw side facing outwards. Hang the Glass door (05) from the inside. You will need assistance in this process. Use clear rubber gasket to prevent glass to NOTE: metal connection. Start first from the top hinge when you begin to hang the door on.
PAGE 10
Fig. 13 10. Install the Handle (06) onto the Glass door (05). Attach the Connected antiwater strip (11) over the vertical edges of the Glass door and the Stationary. Push the Bottom anti-water strip (12) to the glass door. Attach the Bottom anti-water strip (12) over the bottom edge of the Glass door. See Fig. 14 for details. 1 3 2 Fig. 14 Rev 2.
PAGE 11
. Apply caulk inside and outside along bottom and vertical edge of the stationary glass and wall profile. See Fig. 15 for details. CAULK Fig. 15 Product maintenance To insure long lasting life for your acrylic back walls, wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
PAGE 12
WARRANTY DREAMLINE™ LIMITED WARRANTY This is Bath Authority LLC’s (“DreamLine”) exclusive written warranty effective April 2, 2012 This warranty extends only to the original owner/end-user for household use only and is not transferable to a subsequent owner. This warranty applies only to DreamLine™ products purchased from an authorized dealer and installed in United States or Canada. Proof of purchase (original sales receipt) must be provided with all warranty claims.
PAGE 13
TEL: 866-731-8378 – 215-957-1411 FAX: 866-227-9245 – 215-893-1780 WWW.BATHAUTHORITY.COM For more information on DreamLineTM Shower Door and Tub Door please visit www.BathAuthority.com Rev 2.