Installation Guide

“Enigma Z” Rev.1 Ver.1 05/2013
11
13. Attach two Roller assemblies (04) to the Glass door (05).
Suspend the door by hanging the Roller assemblies onto
the Upper guide rail (03) and slide the bottom edge of the
Glass door into the groove of the Guide block (12).
See Fig. 15 for details.
Fig. 15
14. Press the Anti-water strip (14) on the vertical edges of
the Stationary glass (02) and the Glass door (05).
Also press the Bumper strip (13) on the vertical edge
of the Glass door.
Mount the Handle (06) to the Glass door.
Adjust both Door stoppers (01) to ensure that they are
positioned upright and the Glass door is in its
maximum opening and closing range. Tighten the set
screw to fasten them in place.
Adjust the Roller guards on both Roller assemblies to
ensure that the Glass door is secure to the Upper
guide rail.
See Fig. 16 for details.
Fig. 16
1
2
3
4
5
6
1
2
3
4
5
6