Installation Guide

“Enigma Z” Rev.1 Ver.1 05/2013
4
Shower Door Installation
1. Measure the distance between two finished walls.
This distance is marked as “W”.
See Fig. 1 for details.
Fig. 1
2. Your Upper Guide rail (03) has been precut for
your Shower model opening width:
48” or 60” for shower width.
If W-width of your wall-to-wall opening is equal
to the size of your Shower model, it is
unnecessary to cut the Upper Guide rail and
you can continue to Step 3.
If W-width of your wall-to-wall opening is less
than the size of your Shower model, you will
need to cut the Upper Guide rail from the end
which is farther from the Glass brackets (07)
holes.
The length to cut off will be L:
L=Subtract W from the size of your Shower
model.
See Fig. 2 for details. Fig. 2
W
W
L
FOR EXAMPLE
If your wall opening W=47”. Your shower
model is 48”.
L=48”-47”=1”,
You have to cut 1” off from the rail.