Installation Guide

Table Of Contents

“Enigma Z” Rev.1 Ver.1 05/2013

3. Install the Upper guide rail (03) to the Stationary glass

(02) with the Glass brackets (07) and tighten the set

screws.

Slide the Door stoppers (01) on each end of the Upper

guide rail and secure them temporarily.

Slide the Guide Rail brackets (08) on each end of the

Upper guide rail and temporarily secure them as well.

Assemble the Wall Bracket (19) onto the bottom corner

of the Stationary glass.

See Fig. 3 and Fig. 4 for details.

Fig. 3

NOTE:

Before you start installation of the Stationary glass (02), you

have to take the Glass door (05) into the shower room and

lean it against the wall.

Fig. 4