Installation Guide

“Enigma Z” Rev.1 Ver.1 05/2013
6
4. Place the Stationary glass (02) on the preinstalled
shower base or threshold and butt it up against the wall.
(Please note that the Upper Guide rail (03) secured
on the Stationary Glass should face inside the
shower).
Make sure the Stationary glass and the Upper Guide
rail are leveled and aligned with the shower base or
threshold. If a horizontal adjustment is required, adjust
it in the Glass bracket (07).
See Fig. 5 for details.
Fig. 5
5. Outline the position of the Wall bracket (19) and Guide
Rail brackets (08) on the wall.
Set the Stationary glass (02) aside.
Remove the Guide Rail Brackets from the Upper Guide
Rail (03) and the Wall bracket from the Stationary
glass. Place the Wall bracket and Rail bracket to the
outlined positions and mark the holes for drilling.
See fig. 6 for details.
Fig. 6
1
2
3
4
5
6