Installation Guide

“Enigma Z” Rev.1 Ver.1 05/2013
7
6. Drill the holes for the Wall bracket (19) using Ø 5/16
drill bit and insert the Wall anchors (9b). Drill the holes
for the Rail brackets (08) using Ø 3/8” drill bit and
insert the Wall anchors (9a).
See Fig. 7 for details.
Fig. 7
7. Fasten the Wall bracket (19) to the wall
using the Round head screw ST4.2×55
(18).
Mount the male parts of the Guide Rail
brackets (08) onto both walls using the
Round head screw ST6×55 (10).
See Fig. 8 for details.
Fig. 8
1
2
3
4
5
6
Ø 5/16"
Ø 3/8"
Ø 3/8"
1
2
3