Installation Guide

“Enigma Z” Rev.1 Ver.1 05/2013
8
8. Place the Guide Block (12) on the shower base or the threshold
and place the Stationary glass (02) back in to the designated
position so it gets in the groove of the Guide block.
See Fig. 9 for details.
Fig. 9
9. Fasten both female parts of the Guide rail
brackets (08) to their male parts on the walls.
Tighten the set screws on the Guide rail
brackets to secure the Upper guide rail
between the two walls.
Assemble the Wall bracket at the bottom
corner of the Stationary glass and tighten
the bolt.
See Fig. 10 for details
Fig. 10
1
2
1
2
1
2
3