Installation Guide

Rev 1.6
11
16. Apply the sealant along the profiles and guide rails;
on the seams between the bottom guide rail and
the profiles as well as along the shower base or
threshold.
See Fig. 15 for details.
Fig. 15
Product Maintenance
To insure long lasting life for your acrylic back walls, wipe them off after each use with a soft cloth. To
clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Never use abrasive
cleansers, metal brushes or scrapers that could scratch or dull the surface.
To insure long lasting life for your glass shower products, wipe them off after each use with a soft cloth.
Rinse and wipe of the glass using either soft cloth or squeegee to prevent soap buildup. Never use
abrasive cleaners and cleaning products that contain scoring agent because this may scratch the surface.
Never use bristle brushes or abrasive sponges.
To assure a long lasting finish wipe off the metal parts after each use with a soft cloth. Do not use
abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally used, rinse the
surface as soon as possible to prevent finish peeling or corrosion. After cleaning the shiny finishes, rinse
thoroughly and wipe dry with soft cloth. Clean stainless steel surfaces at least once a week. When
applying stainless steel cleaner or polish, work with (not across) the grain. Never use abrasive sponge or
cloth, steel wool or wired brushes.
Caulk