Installation Guide

INFINITY-Z manual Ver 4 Rev 5 06/2017 11

Fig 12

Fig 13

Inside

1 4

NOTE: The lock nut of the upper wheel (Fig 12.4) and the press button of the bottom wheel (Fig 12.1)

should be pointing up.

NOTE: Do not overtighten the wheels.

13. From inside of the shower, insert the bottom Wheel Assemblies (#17) into the Bottom Guide Rail

(#03), lift the door up and snap the top Wheel Assemblies (#17) into the Top Guide Rail (#03).

Test the operation of the door, and if necessary, use a #2 Phillips screwdriver (do not use a power

screwdriver) to adjust the upper wheels so the door rolls smoothly and the closes tight. (Fig 13)

12. Fasten the top and the bottom Wheel Assemblies (#17) to the Door Glass (#04). The top wheels

can adjust the door level using the adjustable bolt and lock nut. The bottom wheel has a press button

to fix the wheel onto the Bottom Guide Rail (#03). The wheels must face towards the outside of

the shower. Be sure that the handle holes are on the correct side for the installation. (Fig 12)