Installation Guide

Model Specific Preparation

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 3

1” Out-of-Plumb

Adjustment; Verify

threshold and walls

with a level

Threshold must be

level

Threshold must be level

This model has a 1” adjustment

wall profile siystem for

Out-of-Plumb wall conditions and

overall width within model size

when placed into finished

opening. For more infomation, see

the Adjustment Wall Profile

System on page 4.

NOTE

For models with Frosted glass, install

the textured (Frosted) surface facing

towards the outside of the shower.

DO NOT attach the handle and/or

towel bar to the glass until instructed

to do so.

DO NOT attempt to use the

handle/towel bar to lift the glass

during installation. This may result in

damage to the glass and/or serious

injury. Always use a professional

grade glass suction cup and an

assistant.

Panel Panel

Door Door

L R

This door is reversible for right or left-hand door installation.

The left-hand door installation is shown as an example

throughout this manual. For the right-hand door installation,

flip the assembly from top to bottom so that the panel is on

the right side.

TIP

1” (25.4mm)

minimum

at threshold

1” max

1”

minimum

threshold