Installation Guide
Table Of Contents
- Infinity-Z_Manual_CoverPage_Tub_Door_and_QWalll_Combined
- INFINITY-Z_Tub_Door_and_QWall_Manual_with_Wall_Profile_Choice_032019
- INFINITY_Z_Shower_and_Tub_Door_Manual_Ver_5_Rev_2_012020
Q-Wall Tub manual Ver 1 Rev 2 11/2017
13
©2017 DreamLine. All Rights Reserved
Fig 14
Fig 13a
Fig 13b
1
2
S
1” reference line
Trim line
13. Align both Back Panels (#02) at the top and tighten the screws on the Center Cover (#05) to
secure this assembly in place. Do not tighten the screws on the corner covers yet. (Fig 13a and Fig 13b)
14. Measure from the 1” reference line to the D
dimension line from Step #3. This will be dimension “S”.
(Fig 14)
Note: Refer to the “D” dimension from Step #3 to
determine the finished cut size “S” for the Side
Panel (#02) in the next steps. (D - 1” = S)