Installation Guide

DUET manual Ver.1 Rev 5 11/2016 15

13. After final adjustments of the Glass doors (#05),

install the small black Pin Blocker that is

packaged with the Rollers (#11).

Insert the Pin Blockers all the way into the

pre-drilled holes on the body of the Roller from

the screw side as shown. This pin will prevent the

doors from being lifted of the track,

See Fig. 18 for details.

14. From inside of the shower, apply a good quality mildew-resistant silicone along the profiles and

the guide rails; on the seams between the bottom guide rail and the vertical profiles as well as

along the shower base or threshold. You may also apply silicone from the outside if you choose.

See Fig. 19 for details.

caulk

Fig. 18

Fig. 19