Manual

Table Of Contents

“PRIME” Enclosure Ver.1 Rev.3 12/2015

Shower Enclosure Installation

1. Fasten the bottom Guide rail (03) to the Glass

profiles (02) with the Round head screws ST4.2x25

(11).

See Fig. 1 for details.

Fig. 1

2. Slide each Stationary glass (05) fully into the groove

of the Glass profiles (02), and then secure it by

attaching the Glass holders (16) to the bottom Guide

rail (03) using the Flat Head ST4.2 x 16 screws (13).

See Fig. 2 for details.

Fig. 2

TIP: Apply a small amount of wax or liquid

soap to the screws to make installation

easier and to prevent stripping the screws

while screwing the Glass profiles (02) to the

Guide rails (03).

TIP: Apply a thin bead of silicone to the

bottom rail when setting the glass in place.