Manual

“PRIME” Enclosure Ver.1 Rev.3 12/2015
9
10. Install the Handles (06) onto the Glass doors (04).
Press the Anti-water strips (08) onto the vertical edges of the
Stationary glass (05) and both vertical edges of the Glass doors
(04) (the shorter strips attach to the panel glass and the longer
strips onto the doors).
Press the Magnetic strips (07) onto the vertical edges of both
Glass doors (04) for a tight seal.
See Fig. 9 for details.
Fig. 9
11. Make final adjustments of the assembled unit within the Wall
profiles (01), making the unit tight to the walls and tight to the
threshold.
From inside of the shower area, drill 2 holes through the Wall
Profiles (01) into the Glass profiles (02) using an Ø 1/8” drill bit.
(one hole at the top and one hole at the bottom)
ATTENTION:
Do not drill the profiles throughout, only through the first
layer of the wall profile and the glass profile.
Secure the Wall profiles (01) to the Glass profiles (02) using
the Round head screws ST4.2×10 (12) and washers (Fig 10.2).
Cover the exposed screw heads with the Decorative covers
(14).
See Fig. 10 for details.
2
1
3
Ø1/8”
2
1
3
Fig. 10
door
panel
door
inside
door