Manual

Table Of Contents

Tools NeededParts Needed

PRIME Shower Enclosure Manual Ver 2 Rev 1b 03/2019

1 2

Fig 4

Before marking the holes for drilling, confirm that:

◻ the assembled frame is tight to the threshold

◻ the Wall Profiles (#01) are tight to the walls

◻ the frame is level

NOTE

Ø3/16”

Drill Bit

*see NOTE

3 4

NOTE

If a stud is present behind the wall, drill a hole

using a Ø3/16” drill bit and do not use wall

anchors.

If no stud is present, drill the hole using a

Ø5/16” drill bit and insert Wall Anchors (#15)

as shown in Fig 4.3.