Manual

Q-Wall 5.2 (w/two back panels) manual Ver. 1 Rev. 2 08/2015
12
Acrylic Back Panel and Side Panel Installation Instruction
14. Attach the Center cover (10)
vertically at the center point along
the line (from Step. 3) and mark the
drilling holes through the predrilled
holes in the Center cover.
Drill the holes using Ø5/16” drill bit
and insert the Wall Anchors (06).
See Fig. 17 for details.
Fig. 17
15. Mount the Center cover (10) to the centerline of the
back wall using the Countersunk screws ST4.2×40
(07). Do not fully tighten the screws at this time; leave
them loose for further installation.
See Fig. 18 and Fig. 19 for details
Fig. 18
1
2
3
4
Ø5/16"
1
2