Manual

Tools
Tip: Measure the finished opening before
proceeding with the installation to be sure
that the correct model size has been
ordered.
Tip: Prior to installation, cover the
shower/tub drain with tape to prevent
losing screws or small parts.
Tip: Set screw gun clutch to low setting
when installing screws and bolts to
prevent stripping the heads.
NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed
diagram and packing list in this manual as a reference. Before discarding the carton, check for small
hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,
please contact DreamLine
®
for replacement. The shipping boxes may contain extra parts not used in
your model configuration.
NOTE: Retain these installation instructions for future reference.
3FLEX 42x72 / 48x72 / 60x72 manual Ver 1 Rev 3 04/2018
©2018 DreamLine. All Rights Reserved
Tape
Phillips
100% Silicone
(Ø=1/8")
(3mm)
Measure
Drill bit
Drill
Pencil
Level
Drill bit
Power
Screwdriver Razor Knife
(Ø=5/16")
(8mm)
Hammer
W
Top
Middle
Bottom
Threshold must be level.
!