Manual

Q-Wall 4 manual Ver 1 Rev 2 08/2015
14
18. Mark the location for the Shelf brackets (04) according to the
measurements in Fig. 20 and Fig. 21.1.
Drill the holes using Ø5/16” drill bit and insert the Wall anchors
(06).
See Fig. 21 for details.
19. Mount the Shelf brackets (04) to the wall using the
Countersunk screws ST4.2×40 (07).
NOTE: the padded set screw of the Glass bracket should be
facing down.
Slide the upper Glass shelf (05) into the upper Shelf
brackets and tighten the set screws at the bottom of the
brackets. Then slide the bottom Glass shelf in place. Tighten
the set screws on the bottom Shelf brackets as well.
See Fig. 22 and Fig. 23 for details.
Fig. 22
1
2
3
3 1/2"
3 1/2"
3 1/2"
Ø 5/16"
1
2
3
Fig
. 21