Manual

“PRIME” Enclosure Ver.1 Rev.3 12/2015
6
3. Insert the Single side strips (09) in-between the
Stationary glass (05) and the Glass profiles (02)
using a wooden shim or plastic blade. The strips
should be inserted from the side that will face inside
the shower.
ATTENTION:
Do not use a screwdriver or other metal objects to
push in the strips to prevent scratching or
damaging the glass and aluminum.
See Fig. 3 for details.
4. Repeat Step #1 and Step #2 to fasten the upper Guide
rail (03) to the Glass profiles and secure the
Stationary glass with the Glass holders (16).
See Fig. 1 and Fig. 2 for details.
5. Slide the Wall profiles (01) all the way over the
Glass profiles (02) on both sides. Make sure the
flanges of the Wall profiles (01) face inside the
shower.
See Fig. 4 for details.
Fig. 3
inside
Fig. 4