Manual

“PRIME” Enclosure Ver.1 Rev.3 12/2015
8
8. Fasten the top and the bottom Wheel assemblies (17) to
the Glass doors (04). The top wheels can adjust the door
level with the adjustable bolt and lock nut. The bottom
wheel has a press button to allow installation of the wheel
into Guide rail (03).
Note:
The lock nut of the upper wheel (Fig 7.1) and the press
button of the bottom wheel should be pointing up.
See Fig. 7 & 8 for details.
Fig. 7
9. Slide the top door wheels into the top
Guide rail (03). Push the bottom
wheels into the bottom Guide rail (03)
by pressing the button on the Wheel
assembly (17).
NOTE:
If necessary, use a hand screwdriver
(do not use a power screwdriver) to
adjust the upper wheels to make
minor adjustments so that the doors
operate smoothly and seal tight with
the magnets.
See Fig. 8 for details.
Fig. 8
2
1
3
4
5
6
NOTE: DO NOT install the handles onto the
door glass until instructed to do so. DO NOT
lift the glass using the handles. This could
result in damage to the glass and/or serious
personal injury.
1
2
3
4
inside