Manual

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
©2018 DreamLine. All Rights Reserved
7CORNERVIEW/FRENCH CORNER Shower Enclosure manual Ver 4 Rev 1 10/2018
NOTE: To prevent damaging the Rail Connector (#04), tighten but Do Not overtighten
the screws.
Fig 3a
Fig 3b
1
2
3
4
5 6
!
Ø1/8”
Ø1/8”
3. Insert the Rail Connector (#04) into the guide rails of the Panel Glass Assembly (#02). Drill a hole
into the outer layer of the Rail Connector (#04), through the predrilled hole in the guide rails using an
Ø1/8” drill bit.
Fasten the top and bottom Rail Connector (#04) to the guide rails with the ST4.2×10 Truss Head
Screws (#06). (Fig 3a and Fig 3b)