Manual

Installation steps
10FLEX Shower Enclosure manual Ver 3 Rev 3 03/2018
©2018 DreamLine. All Rights Reserved
Fig 1
Table 1
SHDR-2230300-RT-01
SHDR-2234340-RT-01
SHDR-2234460-RT-01
SHDR-2234580-RT-01 34-1/2” 56-1/2” ~ 60-1/2”
34-1/2” 44-1/2” ~ 48-1/2”
34-1/2” 32-1/2” ~ 36-1/2”
30-1/2” 28-1/2” ~ 32-1/2”
MODEL #
W1
W2
(DOOR AREA W)
PLACEMENT OF
RETURN
PANEL
PLACEMENT
OF
DOOR
SECTION
(RETURN PANEL W)
W1
W2
Return ProfileWall Profile
RIGHT-HAND RETURN PANEL SHOWN AS AN EXAMPLE
door
return panel
1. The width of the shower enclosure model
is adjustable and can be adjusted to the size
of your shower base or custom threshold.
Mark the position of the Wall profile (#01)
and the Return Panel Wall Profile (#11) on
the wall according to the model size and
dimensions provided in the size table below.
Place the Wall Profile (#01) and the Return
Panel Wall Profile (#11) onto the threshold
against the finished wall. Use a level to adjust
to plumb.
(Fig #1) (Table 1)