Manual

14FLEX Shower Enclosure manual Ver 3 Rev 3 03/2018

Fig 7

Fig 8

decorative

rail cover

7. Extend the width of the Door assembly (#02) by sliding

the top and bottom expanding rails toward the Corner

profile (#10). Insert the Door Glass side into the Corner

profile (#10). (Fig7)

NOTE:

The maximum adjustment of the Expanding rails is 3”.

Do not expand the rails more than 3”.

8. Make sure the Door assembly (#02) is fully extended

into the Wall profile (#01) and the Corner Profile (#10).

Adjust top and bottom Expanding rails to the same

length, making the door area square. Use a tape measure

for accuracy.

Make sure that the top and bottom decorative rail covers

are tight after adjusting the expanding rails. (Fig 8)