Installation Instructions

Rev 1.6

14. Install the Handles (06) to the Glass doors (04).

Press the anti-water strips (08) on the vertical edges of the

Stationary glasses (05) and both vertical edges of the Glass

doors.

Press the Magnetic strips (07) on the vertical edges of both

Glass doors for tight closing.

See Fig. 13 for details.

Fig. 13

15. Do the final adjustments of the assembled unit in the Wall

profiles (02).

Drill the holes in the Glass profile (01) through predrilled holes

in the Wall Profile using Ø 1/8” drill bit.

ATTENTION

Do not drill the profile throughout, only the first layer of

the wall profile.

Secure the Wall profile to the Glass profile using the Round

head screws ST4.2×10 (12).

Cover the exposed screw heads with the Decorative covers

(14).

See Fig. 14 for details.

Fig. 14

Ø1/8”