Installation Instructions

“INFINITY Z” Rev.2 Ver.2 04/2013

13. Slide the top door wheels into the top

Guide rail (03). Push the bottom wheels

in the bottom Guide rail by pressing

down the button.

Use the Phillips screwdriver #2 (do not

use power screwdriver) to adjust upper

wheels, make sure they move smoothly

and the door closes tight.

See Fig. 13 for details.

Fig. 13

14. Install the Handle (06) to the Glass door (04).

Press the anti-water strips (07) on the vertical edge of

the Stationary glass (05) and both vertical edges of the

Glass door. Insert the Seal gasket (15) into the Wall

profile (02).

See Fig. 14 for details.

Fig. 14