Installation Instructions

“INFINITY Z” Rev.2 Ver.2 04/2013
11
15. Do the final adjustments of the assembled unit in the
Wall profiles.
Drill the holes in the Wall Profile and Glass profile using
Ø 1/8” drill bit.
ATTENTION:
Do not drill the profiles throughout, only the first
layer of the wall and glass profiles.
Secure the Wall profile to the Glass profile using the
Round head screws ST4.2×10 (11).
Cover the exposed screw heads with the Decorative
covers (13).
See Fig. 15 for details.
Fig. 15
16. Apply the sealant along the profiles and
guide rails; on the seams between the
bottom guide rail and the profiles as well as
along the shower base or threshold.
See Fig. 16 for details.
Fig. 16
2
1
3
Ø 1/8”
Waterproof
Silicone