Installation Instructions

“INFINITY Z” Rev.2 Ver.2 04/2013
7
6. Slightly tap the Single side strip (08) in between the
glass and the glass profile using wooden shims or
other piece of wood. The strip should be inserted
from the side that will face inside the shower.
ATTENTION:
Do not use the screwdriver or other metal objects;
you can scratch or damage the glass and
aluminum.
7. Repeat Step #3, Step #4, Step #5 and Step #6 to
fasten the upper Guide rail (03) to the Glass profile
and secure the Stationary glass by the Glass holder
(16).
See Fig. 7 for details.
Fig. 7
8. Slide the Wall profiles (02) all the way on the Glass
profiles (01) on both sides. Make sure the flange of
the wall profile faces inside the shower.
See Fig. 8 for details.
Fig. 8