Owner Manual

©2018 DreamLine. All Rights Reserved
UNIDOOR Single Shower Door manual Ver 2 Rev 6.1 03/2018
18
5b. The hinges are factory set to 85 degrees.
You can change this angle by using the adjustment screws
on the hinge plate.
(Fig 5b)
5c. Use the supplied Allen Key to loosen the adjustment screws on the inside hinge plate, adjust
the door to the desired angle (90 degrees for example) then retighten the adjustment screws
(Fig 5c). Be sure that you create a tight seal with the supplied strike vinyl when the door is in the
closed position.
Fig 5b
Fig 5c
inside
outside
inside
outside
View from inside
of shower