UNIDOOR PLUS (STYLE F) SHOWER DOOR GLASS PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com Style F Style F Right side panel installation shown ATTENTION: This model is also available with the Half Frosted Band glass option.
Style “F”: Half Frosted Band Glass Installation NOTE: This model features the half frosted glass option. Hinged Left installation shown. To install for hinged Right, flip the door and panel to the proper handing. NOTE: The textured surface of both the stationary glass and door glass should face outside of the shower. Hinged Left installation UNIDOOR PLUS (STYLE F) manual Ver.
Model#s: SHDR-242907210 SHDR-242957210 SHDR-243007210 SHDR-243057210 SHDR-243107210 SHDR-243157210 SHDR-243207210 SHDR-243257210 SHDR-243307210 SHDR-243357210 SHDR-243407210 SHDR-243457210 SHDR-243507210 SHDR-243557210 SHDR-243607210 SHDR-243657210 SHDR-243707210 SHDR-243757210 SHDR-243807210 SHDR-243857210 SHDR-243907210 SHDR-243957210 SHDR-244007210 SHDR-244057210 SHDR-244107210 SHDR-244157210 SHDR-244207210 SHDR-244257210 SHDR-244307210 SHDR-244357210 SHDR-244407210 SHDR-244457210 SHDR-242907210-HFR SHDR
ADDITIONAL MODEL CONFIGURATIONS for UNIDOOR-X GLASS-TO-GLASS HINGE DOORS Model#s: D12306572-## D1230672 D12314572 D1231472 D12322572 D1232272 D12330572 D1233072 D12406572 D1240672 D12414572 D1241472 D12422572 D1242272 D12430572 D1243072 D12506572 D1250672 D12514572 D1251472 D12522572 D1252272 Finishes: -01 = Chrome -04 = Brushed Nickel -06 = Oil Rubbed Bronze -09 = Satin Black UNIDOOR PLUS (STYLE F) manual Ver.
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
Tools Required Caulk Level Tape Measure Caulk Gun UNIDOOR PLUS (STYLE F) manual Ver.
Detailed Diagram of Glass Panel Components 9 11 13 23 19 20 The glass surface with the ClearMax™ label must be installed to face inside of the shower 29 Packing List 09 11 13 19 U-channel 1 (76”, wall profile) Stationary glass Ø5/16” Wall anchor Anti-Water strip (inline panel) 1pc 20 1pc 23 14pcs 29 1pc Anti-Water strip (enclosure) * Countersunk screw ST4.2x40 U-channel 2 (44”, bottom profile) 1pc 14pcs 1pc NOTE: Unpack your unit carefully and inspect it.
Style “F”: 6”-34” In-Line Stationary Panel Installation NOTE: The Unidoor shower door needs to be installed prior to proceeding with the following Stationary Glass installation instructions. Please see the Single Shower Door installation manual in the door packaging (or the Style M Glass-to-Glass hinge door installation manual included with the hinge panel glass) for complete shower door installation instructions. Before you begin the installation, please recheck your shower opening size.
NOTE: Use parts from “Detailed Diagram of Glass Panel Components” for the Stationary Glass assembly and installation. 2. Measure the actual width of your stationary glass panel. NOTE: You will be doing straight cuts for this stationary panel installation. *It may be necessary to remove any burrs from the cut end of the U-channels with a metal file before placing the Uchannel onto the glass. H Use a miter saw to rough cut the U-channel 2 (44”, bottom profile) (29) to the actual width of the glass (+) 1”.
3. Slip the cut U-channel 2 (44”, bottom profile) (29) and uncut U-channel 1 (76”, wall profile) (09) onto the Stationary glass (11) in the shown locations. With the door open place the Stationary glass on threshold opposite of door. Adjust the Stationary glass and U-channel 1 (wall profile) against the wall to compensate for any out of plumb conditions ensuring that the Stationary glass is level vertically and U-channel 1 is flush with the wall.
5. Remove the U-channel 1 (76”, wall profile) (09), U-channel 2 (44”, bottom profile) (29) and Anti-Water strip (inline panel) (19) from the Stationary glass (11) and set the Stationary glass aside. Place the U-Channel 2 (bottom profile) onto the threshold base in line with the inside threshold mark. Mark the drill holes on the threshold through the predrilled holes in the UChannel 2 and drill the holes using Ø1/8” drill bit.
6. Cut the U-channel 1 (76”, wall profile) (09) at the top mark that was made in step #4. 1 Place the U-Channel 1 (wall profile) on the U-Channel 2 (44”, bottom profile) (29) and align vertically with wall mark. U-Channel 1 2 U-Channel 2 3 Mark the drill holes on the wall through the predrilled holes in the U-Channel 1. Now drill holes in the wall using Ø5/16 drill bit and insert the Ø5/16” Wall anchors (13). 4 Ø5/16” 5 See Fig. 8 for details. Fig. 8 7.
Fig. 10 8. Slide the Stationary glass (11) into the groove of both U-Channels. NOTE: If you have difficulty sliding the Stationary glass into the U-Channels, you can slightly tap on the Stationary glass with a rubber mallet and a piece of wood. 1 2 3 4 Apply a bead of silicone on both open ends of the U-Channels, and its connection. See fig. 11 for details. Fig. 11 UNIDOOR PLUS (STYLE F) manual Ver.
9. Apply a good quality mildew-resistant waterproof silicone along the connection of both U-Channels to the wall and threshold on the inside of shower. Allow 24 hours for the silicone to fully cure before using the shower. See Fig. 12 for details. waterproof silicone inside Fig. 12 10. Notch the Anti-Water strip (inline panel) (19) 1” at the base to fit around bottom U-channel. Press the Anti-Water strip (Door) (19) onto the vertical edge of the Stationary glass (11). 2 1 inside outside See Fig.
Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth.
TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.com UNIDOOR PLUS (STYLE F) manual Ver.
