Installation & Assembly

VISIONS Ver 1 Rev 7 07/2015

14.

Install the Handles (#06) to the Glass doors (#04).(Fig 13.1)

Press the anti-water strips (#08) onto the vertical

edges of the Stationary glass (#05) and both vertical

edges of the Glass doors (#04).

Press the Magnetic strips (#07) onto the vertical edges of

both Glass doors (#04) for a tight seal.

See Fig. 13 for details.

Fig. 13

15.

Do the final adjustments of the assembled unit in the Wall

profiles (#02). Make sure that the bottom rail is tight to the

the threshold.

Drill the holes in the Glass profile (#01) through predrilled

holes in the Wall Profile (#02) using Ø 1/8” drill bit.

ATTENTION

Do not drill the profile throughout, only the first layer of

the wall profile.

Secure the Wall profile (#02) to the Glass profile (#01)

using the Round head screws ST4.2×10 (#12).

Cover the exposed screw heads with the Decorative covers

(#14).

See Fig. 14 for details.

Fig. 14

Ø1/8”