Installation & Assembly

VISIONS Ver 1 Rev 7 07/2015
11
16.
Apply a good quality mildew resistant silicone
along the profiles and guide rails; on the seams
between the bottom guide rail and the profiles
as well as along the shower base or threshold.
See Fig. 15 for details.
Fig. 15
Product Maintenance
BASES and BACKWALLS: To ensure a long life for your acrylic back walls: wipe them off
after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or
cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could
scratch or dull the surface.
GLASS: To ensure long lasting life for your glass shower products: wipe them off after each
use with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to
prevent soap buildup and water spots. To prevent scratching the surface: never use abrasive
cleaners and cleaning products that contain scouring agents. Never use bristle brushes or
abrasive sponges.
HARDWARE: To ensure a long lasting finish: wipe off the metal parts after each use with a
soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach
or acid. If accidentally used, rinse the surface as soon as possible to prevent finish peeling
or corrosion. After cleaning the shiny finishes, rinse thoroughly and wipe dry with soft cloth.
Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or
polish, work with (not across) the grain. Never use abrasive sponge or cloth, steel wool or
wired brushes.
Caulk