Installation & Assembly

Installation steps

6CORNERVIEW/FRENCH CORNER Shower Enclosure manual Ver 4 04/2018

outside

Fig 1

Fig 2

34-1/2"

Ø5/16”

2 3

4 5

Measure from the finished corner

of the shower to the outside of

the wall profile at the threshold

and draw a plumb line up from

there.

outside outside

1. Place the Wall Profiles (#01) onto the

threshold at a distance of 34-1/2” from

the finished corner of the opening and

mark their position on the wall at the

threshold. Use a level to align the Wall

Profiles (#01) vertically and mark the wall.

(Refer to the Shower Enclosure Plan on

page 5 and Fig 1)

2. Mark the drilling holes on the wall through the predrilled holes in the Wall Profiles (#01).

Drill the holes in the wall using a Ø5/16” drill bit and insert the Wall Anchors (#09).

Run a bead of silicone along the back surface of the Wall Profiles (#01) and around the holes in the

wall. Attach the Wall Profiles (#01) to the wall using the Truss Head Screw ST4.2×30 (#05). (Fig 2)