Installation & Assembly

©2018 DreamLine. All Rights Reserved
7CORNERVIEW/FRENCH CORNER Shower Enclosure manual Ver 4 04/2018
NOTE: To prevent damaging the Rail Connector (#04), tighten but Do Not overtighten
the screws.
Fig 3a
Fig 3b
1
2
3
4
5 6
!
Ø1/8”
Ø1/8”
3. Insert the Rail Connector (#04) into the guide rails of the Stationary Glass Assembly (#02). Drill a
hole into the outer layer of the Rail Connector (#04), through the predrilled hole in the guide rails
using an Ø1/8” drill bit.
Fasten the top and bottom Rail Connector (#04) to the guide rails with the Flat Head Screw
ST4.2×10 (#06). (Fig 3a and Fig 3b)