Installation & Assembly

“UNIDOOR (STYLE J)” Ver.1 Rev.4 04/2016
8
H
4. Measure the actual width and height of
your Return panel glass (26).
See Fig. 3 for details.
5. NOTE: You will be doing straight and 45° cuts for
this enclosure installation.
*All 45° cuts are from the outside dimension. (tip
to tip)
*It may be necessary to remove any burrs from
the cut end of the U-channels with a metal file
before placing the U-channel onto the glass.
a) Use a miter saw to rough straight cut one of the
U-channel 2 (44”, bottom profiles) (29) to the
actual width of the glass (+) 1 1/4”.
b) Use a miter saw to rough straight cut the U-
Channel 1 (76”, wall profile) (09) to the actual
height of the glass (+) 1”.
See Fig. 4 & 5 for details.
Fig. 3
W (+) 1 1/4"
Fig. 4
a)