Installation & Assembly

UNIDOOR-X (STYLE M) manual Ver 2 11/2016

hinge panel

Fig 24

Install the hinges flush

with the edge of the

Hinge Panel Glass

hinge panel glass

2mm hinge

gasket

19. Attach the Hinges (#05) to the Hinge Panel Glass (#32)

with the bolts facing inside the shower. Install the hinges onto

the Hinge Panel Glass (#32) flush with the edge of the glass.

Use at least one 2mm hinge gasket per side. Tighten the hinge

bolts evenly and snap in the decorative bolt caps.

(Figs 24 and 25)

NOTE: Do not attach the handle

to the door glass until instructed.

Do not attempt to lift the door

glass with the handle as this may

result in damage to the glass

and/or serious personal injury.

Use a professional grade glass

suction cup and an assistant

when handling heavy glass.

NOTE: These adjustable hinges are factory set to overclose.

See Page 27 for instructions regarding the adjustment features

of these hinges.