UNIDOOR-X Enclosure (Style L1) SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION + STEP 1: Install Shower Door ! = STEP 2: Install Return Panel STYLE L1 NOTE: Refer to the Return Panel Manual for Enclosure Installation dimensions. 1-866-731-2244 For more information about DreamLine® products please visit DreamLine.
UNIDOOR-Xe Styled M e n v i r GLASS-TO-GLASS HINGE SLHOWERsD eOOR INSTALLATION m e a sR e r D ght © Ri All IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice for the purpose of product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details.
d e e in erv L s m e a R e r s t D gh © Ri All This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially-formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. d e e in erv L s m e a R the glass after e r For best results, squeegee s t D dryhwith a soft cloth.
Table of Contents Section title Important Steps Page # Model Numbers 3 2 d e e n v i r L e s m e a R e Dr ghts © Ri All Model Styles and Manuals Preparation Tools Parts List & Detailed Diagram of shower door components Installation of 6” Hinge Panel with Hinge Panel Glass Bracket 4~5 6 7 8 Installation of 24” Hinge Panel Glass with L-Bar™ 10~14 15~21 Hinges and Door Glass installation 22~23 Vinyl Seals 24~25 Adjustable Hinge instructions 27 Product maintenance 28 NOTE: Unpack your unit ca
! The hinge panel glass must be properly installed and secured to support the weight of the door glass. Failure to follow these steps may result in the hinge panel glass pulling out of the U-Channel.
Model Numbers d e e in erv L s m e a R e r s t D gh © Ri All UNIDOOR-X Style M with 6” hinge panel with Hinge Panel Glass Bracket UNIDOOR-X Style M with 24” hinge panel with Left or Right L-Bracket D12372-## D12472-## D12572-## D12672-## D12772-## D12872-## D12972-## D13072-## D32372L-## D32372R-## D32472L-## D32472R-## D32572L-## D32572R-## D32672L-## D32672R-## D32772L-## D32772R-## D32872L-## D32872R-## D32972L-## D32972R-## D33072L-## D33072R-## d e e in erv L s m e a R e r s t D gh © Ri l l A ##-
This Unidoor-X Style M manual is used with the following Model Styles: d e e in erv L s m e a R e r s t D gh © Ri All Style L1 Style M Style M2 Style M1 ! d e e in erv L s m e a R e r s t D gh © Ri l l A Style M4 Style M3 When installing one of the glass-to-glass hinges configurations shown above; Discard the Style A manual that is packaged with the door glass and use this Style M manual for the installation of the hinge panel glass and door glass.
©2019 DreamLine.
©2019 DreamLine. All Rights Reserved Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
©2019 DreamLine. All Rights Reserved Tools Level d e e n Tape Phillips v i r L e Pencil Measure s Screwdriver m e a R e r s t D gh © Ri All Drill bit (Ø=5/16") Drill bit (Ø=1/8") Metal File 100% Silicone* Power Drill Hammer Miter saw or Hacksaw *Quick-drying/fast curing silicone recommended for the installation of hinge panels.
©2019 DreamLine.
©2019 DreamLine. All Rights Reserved Installation steps Style M - 6” & 24” Inline Panel and Shower Door Installation NOTE: The following shower door installation instructions should be used as a general guide and prerequisite to the installation of the UNIDOOR Style M, M1, M2, M3, M4 and L1 models. Before you begin the installation, please check your finished opening size and model dimensions to ensure proper placement of the Hinge Panel Glass (#32) and Door Glass (#01).
©2019 DreamLine. All Rights Reserved Installation steps for 6” hinge panel with Hinge Panel Glass Bracket 1. Draw a line on the threshold and up the wall to represent the outside edge of the U-channels. Make sure the line is parallel to the front edge of the threshold. (Fig 1) 2. Use a hacksaw or a miter saw: Cut the Vertical U-channel to 69-7/16”. Cut the Bottom U-channel** to 6”.
Hinge Panel Glass Bracket (#36) on the wall and threshold to mark the holes for drilling. (Fig 3) Outside edge of U-Channel ©2019 DreamLine. All Rights Reserved 3. Position the U-channels and 4. Mark the hole positions on the wall and threshold through the holes in the U-channels and the Hinge Panel Glass Bracket (#36). (Note that the Hinge Panel Glass Bracket (#36) is wider than the u-channel and must be aligned correctly with the u-channel).
install the wall anchors. • Drill Ø1/8” holes into an acrylic threshold OR •Drill Ø5/16” holes and install anchors for installation into a tile threshold. (Fig 5) ©2019 DreamLine. All Rights Reserved 5. Drill Ø5/16” holes in the wall and 6. Apply silicone to the back of the U-channels and the screw holes, then install the U-channels and Hinge Panel Glass Bracket (#36) using the ST4.2 x 40mm Countersunk Screws (#23).
into the bottom U-channel to protect the bottom corners of the glass. Apply a bead of silicone into the length of the U-channels. (Fig 7) ©2019 DreamLine. All Rights Reserved 7. Add the PVC Glass Spacer (0.5mm) (#34) 8. Install the Hinge Panel Glass (#32) into the U-channel, checking for level and plumb. Install the gasket into the Hinge Panel Glass Bracket (#36). (Note: Make sure the top of the hinge panel glass is at the top).
©2019 DreamLine. All Rights Reserved 9. Tighten the rubber-tipped set screws on the Hinge Panel Glass Bracket (#36) to secure the hinge panel glass. (Fig 9) d e e in erv L s m e a R e r s t D gh © Ri de insi l l A ! Fig 9 NOTE: Following the installation of the Hinge Panel Glass (#32), it is required to allow the silicone to fully cure before hanging the door glass. (Fig 9) Proceed to Step #19 on Page 22 to continue the installation of the Hinges, Door Glass and other components.
©2019 DreamLine. All Rights Reserved Installation steps for 24” hinge panel glass and the L-Bar™ 10. Cut the Vertical U-channel 1 (#09) to 71”. (Fig 10) U-Channel 1 d e e in erv L s m e a R e r s t D gh © Ri All 71” 71” Fig 10 11. Cut the Bottom U-channel 2 (#29) to 24” (see note** below).
onto the threshold, parallel to the outside edge. Mark the position of the U-channel and mark the position of the holes for drilling. You need to use at least 3 holes for the U-channel 2 (bottom profile) (#29): one near each end and one near the center. • Drill the holes into the threshold using an Ø1/8” drill bit. (Or use a Ø5/16” bit and anchor for tile) • Apply a bead of silicone to the bottom of the U-channel 2 (bottom profile) (#29) and attach it to the threshold using the ST4.
profile) on top of the installed bottom U-channel. Use a level to plumb the U-channel 1 (#09) (wall profile) and mark the positions of the holes for drilling. You need to use at least four holes for the U-channel 1 (#09) (wall profile). 1 ©2019 DreamLine. All Rights Reserved 13. Next, position the vertical U-channel 1 (#09) (wall 2 d e e n v i r L e s m e a R e 3 Dr ghts © Ri All • Drill the holes into the wall using a Ø5/16” drill bit. • Insert the Ø5/16“ Wall Anchors (#13) into the holes.
d2 e e n v i r L e s m e a R e Dr ghts © Ri All 15. Install the Hinge Panel Glass (#32) into the U-channel 2 (#29) (bottom profile) and the U-channel 1 (#09) (wall profile). Apply a dab of silicone to the exposed end of the bottom u-channel. (Fig 15a and 15b) 1 wall ©2019 DreamLine. All Rights Reserved ! NOTE: There is a top and a bottom to the Hinge Panel Glass (#32): The top hinge cutout is 7-7/8” to center, the bottom hinge cutout is 8-3/8” to center.
©2019 DreamLine. All Rights Reserved Installation steps for 24” hinge panel glass with L-Bar™ d e e n v i r L e s m e a R e Dr ghts © Ri 35.9 l l A L- Bar™ Assembly (#35) Parts List** 35.4 35.5 35.3 35.6 35.2 35.1 35.7 35.8 d e e n v i r L e s m e a R e Dr ghts © Ri All 1 pc 35.6 Wall plate Left-hand bracket shown as an example 35.1 35.2 35.3 35.4 35.5 PVC spacer Rubber tip set screw L-Bar™ (left hand shown) Decorative cover Ø5/16” Wall anchor 1 pc 2 pcs 35.7 Truss Head Screw ST 4.
©2019 DreamLine. All Rights Reserved Left-hand bracket installation shown as an example 16. Position the L-Bar™ Assembly (#35) onto the Hinge Panel Glass (#32) as shown and mark its position on the wall. Remove the Wall Plate (#35.6) from the L-Bar™. Hold the Wall Plate (#35.6) to the marks on the wall. Check for level and mark the holes for drilling through the wider, untapped holes. (Fig 16.2) Drill two Ø5/16”(8mm) holes and insert the Ø5/16” Wall anchors (#35.5).
©2019 DreamLine. All Rights Reserved 18. Adjust the Panel Glass to plumb and tighten the screws. Attach the Decorative Cover (#35.4). Secure the L-Bar™ (#35.3) to the top of the Panel Glass using the clear gasket and rubber-tipped set screws. Firmly tighten but Do Not overtighten the set screws.
1 out ©2019 DreamLine. All Rights Reserved 19. Attach the Glass-to-Glass Hinges (#05) to the Hinge Panel Glass (#32) with the bolts facing inside the shower. Install the hinges onto the Hinge Panel Glass (#32) flush with the edge of the glass. sid e d e e in erv L s m e a R e r s t D gh © Ri All Fig 19 Use at least one 2mm hinge gasket per side. Tighten the hinge bolts evenly and snap in the decorative bolt caps.
1 2 ©2019 DreamLine. All Rights Reserved 20. The Door Glass (#01) ships with 5/8” spacers. These 5/8” spacers will create the proper spacing at the bottom of the door glass and will ensure the installed door height finishes at 72”. (but always confirm with a measurement) 3 door glass inside door glass d e e in erv L s m e a e FigR r s t D gh 20 © Ri All 5/8” outside 2mm hinge gasket Set the Door Glass (#01) with the 5/8“ spacers attached onto the threshold, inline with the Hinge Panel Glass (#32).
Handle side of door 1 2 3 4 ©2019 DreamLine. All Rights Reserved 22. Measure the bottom of the Door Glass (#01) from side to side to determine the actual width of the door. Cut the Bottom Sweep Vinyl (#07) to the size of your measurement and notch 3/8” of the inner side of the Bottom Sweep Vinyl (#07) as shown in Fig 22.2. Press the Bottom Sweep Vinyl (#07) onto the bottom edge of the Glass Door (#01).
! ©2019 DreamLine. All Rights Reserved For Style M only: If your model does not include additional panel glass, proceed to the next step to install the L-Strike Vinyl w/VHB tape (#08) to the wall. 1 Inside shower NOTE: Before installing the L-strike vinyl, refer to the adjustable hinge instructions on Page 27. d e e in erv L s m e a R e r s D ght © Ri l l A Setting the hinges to overclose must be done BEFORE the L-Strike Vinyl w/VHB tape is installed.
©2019 DreamLine. All Rights Reserved 25. Apply a good quality mildew-resistant/waterproof silicone along the connection of both U-Channels to the wall and threshold on the inside of the shower. Remove the bottom section of the Hinge-Side Vinyl Seal (#33) and let the silicone cure before closing the door to avoid contact with the Hinge-Side Vinyl Seal (#33). (Fig 25) d e e in erv L s m e a R e r s D ght © Ri l l A ! d e e n v i r L e s m e a R e r s D Fig 25ght © Ri l l A 24 Hours 26.
©2019 DreamLine.
©2019 DreamLine. All Rights Reserved Product Maintenance BASES and BACKWALLS: To ensure long-lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
d e e in erv L s m e a R e r s t D gh © Ri l l A d e e in erv L s m e a R e r s t D gh © Ri l l A TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.com ©2019 DreamLine.
Install the door first UNIDOOR Plus® (Style L) SHOWER ENCLOSURE PANEL INSTALLATION e ed INSTRUCTIONS n erv i L PLEASE REVIEW THIS ENTIRE MANUAL PRIOR s TO INSTALLATION m e a R e r s t D gh © Ri l l A UNIDOOR PLUS STYLE L d e e n v i r L e s m e a R e r s D ght © Ri l l A ® Right-hand return panel STYLE L16 UNIDOOR-X STYLE L124 IMPORTANT! DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice for the purpose of product improvement and customer experienc
TM This is a specially formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. For best results, squeegee the glass after each use and dry with a soft cloth.
Section Title Model Styles Important Information about your new shower door Model Specific Preparation Shower Enclosure Plan Tools Detailed Diagram of Return Panel Glass Components Parts List Installation Overview Installation Steps Product Maintenance & Maintenance Checklist Troubleshooting Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri l l A ® d e e n v i r L e s m e a R e r s D ght © Ri l l A Page # 2 3 4 5-6 7 8 9 11 12-23 24 25 26 ® TIP TIP - for ease of installation.
©2020 DreamLine® All Rights Reserved Model Styles Unidoor Plus MODEL #s SHEN-24300300F-## d e e in erv L s m e a R e r s t D gh © Ri l l A ® STYLE L UNIDOOR 30” Shower Door with glass-to-wall hinges and 30” full height return panel installed with U-Channel STYLE L Unidoor-X Style L16 Style L124 MODEL #s E12330-## E12334-## E12430-## E12434-## E12730-## E12734-## E12830-## E12834-## E12930-## E12934-## E13030-## E13034-## MODEL #s E32330L-## E32330R-## E32334L-## E32334R-## E32430L-## E32430R-## E324
©2020 DreamLine® All Rights Reserved WARNING DISCLOSURE STATEMENT d e e in erv L s m e a R e r s t D gh © Ri l l A IMPORTANT • • • DreamLine® reserves the right to alter, modify or redesign products any time without prior notice for product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details.
©2020 DreamLine® All Rights Reserved Model Specific Preparation ! REQUIRED: 5/8” minimum threshold Check walls and threshold with a level d e e in erv L s m e a R e r s t D gh © Ri l l A ® 1/2” Max Out-of-Plumb adjustment within the u-channel on return panel wall only Threshold must be level ! 5/8” (16mm) minimum flat threshold Left-hand door with Right-hand return panel installation shown as an example NOTE Tile TIP Acrylic 1/2” Max Tub Contact the manufacturer of the base, tub or thresho
©2020 DreamLine® All Rights Reserved Shower Enclosure Plan UNIDOOR PLUS Outside surface of the return panel u-channel A = (30-7/16”) Unidoor Plus models with Glass-to-Wall hinges Style L d e e in erv L s m e a R e r s t D gh © Ri l l A A= (30 -7/ ) 0” (3 ® (30”) 16 ”) Outside surface of the door glass Return panel STYLE L Finished wall surface Finished wall surface G= (30”) door A = (30-7/16”) Outside surface of the return panel glass A rn Retu el Pan Do or l ane P n tur Do or
©2020 DreamLine® All Rights Reserved Shower Enclosure Plan UNIDOOR-X Outside surface of the return panel u-channel A= Model Width (+) 1/16” Finished wall surface Style L16 Style L124 d e e in erv L s m e a R e r s t D gh © Ri l l A A ® (30-1/16”) (34-1/16”) hinge panel ”) 16 ”) / -1 6 (30 -1/1 (34 A= Mo de l si ze Outside surface of the u-channel (+ )1 return panel Unidoor-X models with Glass-to-Glass hinges Finished wall surface STYLE L1 G =(30”) (34”) door A= Model Width (+) 1/16”
©2020 DreamLine® All Rights Reserved Tools Tape Measure Level #2 Phillips Screwdriver Extended driver bit TIP d e e in erv L s m e a R e r s t D gh © Ri l l A #2 Phillips Driver Bit Metal File Pencil Drill Bit Ø1/8" (3mm) Power Drill Razor Knife Safety Glasses ® Soft Head Hammer Silicone Work Gloves Drill Bit Ø3/16" (5mm) Drill Bit Ø5/16" (8mm) or Miter Saw Hacksaw Professional-grade Glass Suction Cup (optional but recommended) Carpenter’s Square d e e n v i r L e s m e a R e r s D
©2020 DreamLine® All Rights Reserved Detailed Diagram of Return Panel Glass Components d e e in erv L s m e a R e r s t D gh © Ri 11 l l A ® 19 09 23 13 d e e n v i r L e s m e a R e r s D ght © Ri l l A ® The glass surface with the ClearMax™ label must be installed to face inside of the shower UNIDOOR PLUS Style L Shower Enclosure Panel Manual Ver 2 012020 09 29 23 8
©2020 DreamLine® All Rights Reserved Parts List 09 11 13 d e e in erv L s m e a x1 R x1 e r s t D gh © Ri l l A 23 29 ® Vertical U-Channel 20 90˚ Strike Vinyl 28 x1 ST4.2×40mm Countersunk Screw 19* x14 Bottom U-Channel x14 x1 NOTE *180˚ Strike Vinyl is packaged with the Panel Glass and is only used with Inline Panel models and is not used with this Enclosure installation d e e n v i r L e s m e x1 a x1 R e r s D ght © Ri l l A ® PVC Glass Spacer 0.
©2020 DreamLine® All Rights Reserved The Unidoor Shower Door must be installed first, prior to proceeding with the following Return Panel Glass installation instructions. ! Please see the Unidoor Shower Door Installation Manual packaged with the door glass for complete shower door installation instructions. d e e in erv L s m e a R e r s t D gh © Ri l l A ®manual for the proper dimension Use the “Shower Enclosure Plan” in this to install the door glass based on your model size.
©2020 DreamLine® All Rights Reserved Installation Overview Place the U-Channels (#09 and #29) on the wall and threshold at the model dimensions based on your model size as shown in the "Shower Enclosure Plan" (Pages 5-6). Note that the space for the door area must be no less than the “nominal door size” d e e in erv L s m e a R e r s t D gh © Ri l l A ® A model height = 72”(1829mm) Wall vertical u-channel = 71”(1803.
©2020 DreamLine® All Rights Reserved Installation Steps 1 NOTE Use parts from the “Detailed Diagram of Return Panel Glass Components” for Return Panel Glass assembly and installation.
©2020 DreamLine® All Rights Reserved 2 Cut the Bottom U-Channel to: Glass Width (W) + 3/16” = (L)** **see the exception on the previous page d e e in erv L s m e a R e r s t D gh © Ri l l A ® OR (L) d e e n v i r L e s m e a R e Fig 2 r s D ght © Ri l l A ® Parts Needed 29 Tools Needed OR x1 UNIDOOR PLUS Style L Shower Enclosure Panel Manual Ver 2 012020 13
©2020 DreamLine® All Rights Reserved Cut the Vertical U-Channel to: Glass Height H (-) 13/16” = (V) 3 Fig 3 d e e v in (V) r L e s m e a R e r s t D gh © Ri OR l l A ® (V) 71” Fig 3 NOTE Cut the Vertical u-channel to 71” for the standard 72” model height TIP Use a metal file to remove any burrs® from the cut ends of the U-Channels before placing them onto the glass.
©2020 DreamLine® All Rights Reserved 4 Fig 4a d e e in erv L s m e a R e r s t D gh © Ri l l A ® 2” (50.8mm) Fig 4b d e e n v i r L e s m e a R e r s D ght © Ri l l A ® ! Cut several 2” - 3” pieces of the PVC Glass Spacer 0.5mm (#28). Set these into the bottom u-channel after applying silicone in Step #8. DO NOT install one long continuous piece into the Bottom (#29) U-Channel.
Install the Vertical U-Channel on top of the Bottom U-Channel Part #09 ©2020 DreamLine® All Rights Reserved 5 Wall d e e in erv L s m e a R e r s t D gh © Ri l l A ® 72” d e e n v i r L e s m e a Fig 5 e R r s D ght © Ri l l A ® NOTE Part #29 Refer to the Shower Enclosure Plan on pages 5-6 for the proper location of the U-Channels based on the model size TIP Use a Carpenter’s square for accuracy when marking the threshold Tools Needed Parts Needed 09 29 Right-hand Return Panel installation
1 ©2020 DreamLine® All Rights Reserved 6 2* d e e in erv L s* see note m e a R e r s t D gh © Ri l 4 l A ® 3 silicone the back of the U-Channel Fig 6 For installation into an Acrylic threshold: d e e n v i r L e s m e a R e r s D ght © Ri l l A ® NOTE ◾ Drill an Ø1/8”(3mm) hole and use the ST4.2 x 40mm Countersunk Screws (#23). For installation into a Tile threshold ◾ Drill a Ø3/16” (4mm) hole up to the stud, drill an Ø1/8” (3mm) pilot hole into the stud and use the ST4.
©2020 DreamLine® All Rights Reserved 7 1 2 3 d e e in erv L s m e a R e r s t D gh © Ri l l A 5 ® 4 * see note silicone the back of the U-Channel Fig 7 d e e n v i r L e s m e a R e r s D ght © Ri l l A ® NOTE ◾If a Stud is present behind the wall: drill a Ø3/16”(4mm) hole up to the stud, drill an Ø1/8” (3mm) pilot hole into the stud and use the ST4.
©2020 DreamLine® All Rights Reserved 8 d e e in erv L s m e a R e r s t D gh © Ri l l A ® d e e n v i r L e s m e a R e r s D ght © Ri l l A ® Fig 8 Tools Needed Right-hand Return Panel installation shown UNIDOOR PLUS Style L Shower Enclosure Panel Manual Ver 2 012020 19
TIP ©2020 DreamLine® All Rights Reserved 9 A professional-grade Glass Suction Cup is recommended for handling heavy glass d e e in erv L s m e a R e r s t D gh © Ri l l A 1 ® 1 2 Insert panel glass into the vertical U-Channel first ... ...then slide the panel glass down into the bottom U-Channel d e e n v i r L e s m e a R e r s D ght © Ri l Fig 9 l A 2 ! After applying silicone into the bottom u-channel, insert the cut pieces of the PVC Spacers 0.
1 2 d e e in erv L s m e a R 1” re s t D gh © Ri Fig 10a l l A ® 3 ©2020 DreamLine® All Rights Reserved 10 notch to fit around u-channel inside outside d e e n v i r L e s m e a R e r s D ght © Ri l l Fig 10b A ® Parts Needed Tools Needed 20 Right-hand Return Panel installation shown UNIDOOR PLUS Style L Shower Enclosure Panel Manual Ver 2 012020 x1 21
©2020 DreamLine® All Rights Reserved 11 d e e in erv L s m e a R e r s t D gh © Ri l l A ® Fig 11a Return Panel d e e n v i r L e s m e a R e r s DDoor ght © Ri l l A inside of shower ® 1/16-1/8" (Overhead View) Fig 11b UNIDOOR PLUS Style L Shower Enclosure Panel Manual Ver 2 012020 22
©2020 DreamLine® All Rights Reserved 12 NOTE The surfaces need to be clean and free of debris before applying silicone. 24 Hours d e e in erv L s m e a R e r s t D gh © Ri l l A ® d e e n v i r L e s m e a R e r s D ght © Ri l l A ® Fig 12 ! Tools Needed Allow 24 hours for the silicone caulk to cure before using shower.
©2020 DreamLine® All Rights Reserved Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could permanently scratch or dull the surface.
©2020 DreamLine® All Rights Reserved Troubleshooting Problem/Symptom Suggested Solution page# • Check all shipping/packaging material for missing parts/components. • If not found, contact DreamLine Customer ® Support [1-866-731-2244] to order factory part replacement.
©2020 DreamLine® All Rights Reserved Factory Parts Information UNIDOOR PLUS (Style L) Enclosure Panel ITEM # FACTORY PART NUMBER 04154011-1930 / 04154041-1930 / 09 04154061-1930 / 04154091-1930 11 010137109 11* 010137111 13 07552148 20 23 28 29 FACTORY PARTS INFORMATION ITEM DESCRIPTION U-Channel 1" Aluminum for 10mm (3/8in.
d e e in erv L s m e a R e r s t D gh © Ri l l A ® d e e n v i r L e s m e a R e r s D ght © Ri l l A ® TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
