Installation & Assembly

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016
18
14. Place the U-Channel 2 (bottom profile)
(29) for the Stationary glass (11) onto the
threshold base in line with the inside
threshold mark and flush with 45° corner
cut .
Mark the drill holes on the threshold
through the predrilled holes in the
U-Channel 2 and drill the holes using
Ø1/8” drill bit.
Apply waterproof silicone along the bottom
surface and around the holes of the
U- Channel 2 and fasten it to the base with
the Countersunk screws ST4.2×40 (23).
NOTE: The surface needs to be clean and
free of debris before applying silicone.
See Fig. 19 & 20 for details.
Fig. 20
Fig. 19
Ø1/8”
1
3
5
2
4
inside
outside
waterproof
silicone
©2017 DreamLine. All Rights Reserved