Installation & Assembly

“UNIDOOR PLUS (STYLE J)Ver.1 Rev.5 06/2016
20
17. Slide the Stationary glass (11) into the
groove of the U-Channel. Make sure the
vertical edge of the Stationary glass is
flush with outer face of the Return panel
glass (26) at the corner.
Apply a bead of silicone on the open end
of the U-Channel, and its connection.
Ensure that the silicone applied to the open
end is flat and smooth so that it will not
interfere with the installation of the L-
shaped strip*(08) in step #20.
NOTE:
If you have difficulty sliding the Stationary
glass into the U-Channel, you can slightly
tap on the Stationary glass with a rubber
mallet and a piece of wood.
See fig. 25 & 26 for details.
Fig. 25
1
3
2
4
Fig. 26