Installation & Assembly

UNIDOOR-X (STYLE M) manual Ver 2 11/2016

Max 3/16”

(4mm)

Max 3/16”

(4mm)

Ø5/16"

(8mm)

Fig 20

Fig 21

(Left-hand bracket installation shown)

16. Position the L-Bracket assembly (#35) onto the Hinge Panel Glass (#32) as shown and mark its

position on the wall.

Remove the Wall Plate (#35.6) from the L-bracket. Hold the Wall Plate (#35.6) to the marks on the

wall. Check for level and mark the holes for drilling through the wider, untapped holes. (Fig 20.2)

Drill two Ø5/16”(8mm) holes and insert the Ø5/16” Wall anchors (#35.5). (Fig 20)

17. Attach the Wall Plate (#06) to the wall using the ST4.2 x 40 (#35.7) screws.

Re-attach the L-Bracket (#35.3) to the Wall Plate (#35.6) using the Flat Head Screw M5x14 (#35.8)

and adjust the angle if necessary by using the Wall Plate Adjustment Set Screws (#35.9).

(Fig 21.7

and 21.8)