Installation & Assembly

UNIDOOR PLUS (Style-J) manual Ver 1 Rev 7 102016
14
10. Carefully disassemble the panels for the
next steps.
See Fig. 13 for details.
11. Place the c u t U-Channel 2 (bottom
profile) (29) for the Return panel glass
(26) onto the
ledge in line with the inside
mark
.
Mark the drill holes on the ledge through
the predrilled holes in the U-Channel 2 and
drill the holes using Ø5/16 drill bit.
Insert the Ø5/16” Wall anchors (13).
Apply waterproof silicone along the bottom
surface and around the holes of the U-
Channel 2 and fasten it to the ledge with
the Countersunk screws ST4.2×40 (23).
NOTE: The surface needs to be clean and
free of debris before applying silicone.
See Fig. 14 & 15 for details.
1
3
5
2
4
inside
outside
Painters tape
U-channel 1
90° Corner
Bracket
Return glass
Stationary
glass
U-channel 2
U-channel 2
Fig. 13
Fig. 14
waterproof
silicone
Ø5/16”
6
©2017 DreamLine. All Rights Reserved