Installation & Assembly

Tools

ENCORE Shower and Tub Door Manual Ver 1 Rev 6 04/2019 4

Soft Head

Hammer

Ø1/8"

(3mm)

Drill Bit

Ø5/16"

(8mm)

Drill Bit

Ø3/16"

(4mm)

Professional-grade

Glass suction cup

Level

Measure

Tape

Pencil

Drill

Power

Painter’s Tape

Phillips

Screwdriver

Silicone

Hacksaw

Work Gloves

Safety Glasses

1” thick

wood block

TIP

Measure the finished opening before proceeding with the installation to

be sure that the correct model size has been ordered.

Prior to installation, cover the shower/tub drain with tape to prevent

losing screws or small parts.

To prevent stripping the screw heads, set screw gun clutch to a

low setting when installing screws and bolts.

Unpack your unit carefully and inspect it. Lay it out and identify all parts using the

Detailed Diagram on page 5 and parts list in this manual as a reference. Before

discarding the carton, check for small hardware bags that may have fallen to the

bottom of the box. If any parts are damaged or missing, please contact DreamLine

for replacement. The shipping boxes may contain extra parts not used in your model

configuration.

TIP

NOTE

Retain these installation instructions for future reference.

Mitre Saw