Manual

Table Of Contents

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016

2. Please mark measurement lines on the wall and

threshold for the Glass Door and U-channel

according to the size of your model.

You will need to use the Product Width values

determined in step #1 in Size Table A.

Please Note that these dimensions are nominal

dimensions and not actual glass sizes.

NOTE: M and L dimensions are from the finished

wall to the outside of the U-channel as shown in

Fig. 1.

NOTE: The Unidoor hinge is factory set to over close 8°.

The following procedure is recommended to ensure

proper alignment of the panel glass and door.

3. Align the Door so that it is perpendicular to the wall and

parallel to the threshold. Measure across the bottom span of

the Door and threshold on the outside of shower and

determine an equal value.

Mark a line on the threshold base on the handle side to assist

with aligning the inline panel glass.

See Fig. 2 for details.

Door

Panel

Return Panel

L-1/16"

M =

Door

Panel

1/8"

L =

Return Panel

7/16"

Fig. 1

Size Table A

Value

inside

outside

inside

Door

Fig. 2