Manual

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016
14
9. Carefully disassemble the panels for the
next steps.
See Fig. 11 for details.
10. Place the U-Channel 2 (bottom profile)
(29) for the Return panel glass (26) onto
the threshold base in line with the inside
threshold mark .
Mark the drill holes on the threshold
through the predrilled holes in the U-
Channel 2 and drill the holes using Ø1/8”
drill bit.
Apply waterproof silicone along the bottom
surface and around the holes of the U-
Channel 2 and fasten it to the base with
the Countersunk screws ST4.2×40 (23).
NOTE: The surface needs to be clean and
free of debris before applying silicone.
See Fig. 12 & 13 for details.
Ø1/8”
1
3
5
2
4
inside
outside
Painters tape
U-channel 1
Anti-Water strip
90° Corner
Bracket
Return glass
Stationary
glass
U-channel 2
U-channel 2
Fig. 11
Fig. 12
waterproof
silicone
©2017 DreamLine. All Rights Reserved