Installation Guide

“UNIDOOR PLUS (STYLE I)” Ver.1 Rev 4 06/2016
19
16. Slide the Stationary glass (11) into the
groove of the U-Channel. Make sure the
vertical edge of the Stationary glass is
flush with outer face of the Return panel
glass (26) at the corner.
Apply a bead of silicone on the open end
of the U-Channel, and its connection.
NOTE:
If you have difficulty sliding the Stationary
glass into the U-Channel, you can slightly
tap on the Stationary glass with a rubber
mallet and a piece of wood.
See fig. 23 & 24 for details.
Fig. 23
1
3
2
4
Fig. 24