Manual

14PRISM PLUS with Buttress Shower enclosure manual Ver 1 10/2018

135° Strike Vinyl

w/VHB Tape (#05)

hinge

panel

glass

outside

door

glass

NOTE:

Protect the edge of the door glass to prevent

contact with the buttress wall during installation.

NOTE:

Protect the edge of the

door glass to prevent contact

with the buttress wall during

installation.

Fig 10

1 2

10. Carefully bring the Door Glass (#06) into the shower between the Hinge Panel Glass (#02) and

the buttress wall. USE CAUTION: Do not to let the glass contact the wall or threshold. Level up the

Door Glass (#06) next to the Hinge Panel Glass (#02) and fasten the 130º Glass-to-Glass Adj Hinge

(#12) onto the Door Glass (#06). Make sure the Door Glass (#06) and the Hinge Panel Glass (#02)

are flush at the top and that the door is level and plumb. Be sure to use two 13/16” shims beneath the

door glass during installation. (Fig 10)