Manual

16PRISM PLUS with Buttress Shower enclosure manual Ver 1 10/2018

Fig 13

Fig 14

outsideoutside

1 2

NOTE: Use caution not to damage

the glass when setting it into place.

14. Assemble the Bottom Brackets (#10) through the holes at the bottom of both lites of Panel Glass,

using the gaskets to prevent glass to metal contact. Install the Bottom Brackets (#10) through the holes

in the bottom of the Buttress Return Panel Glass (#04) and the Hinge Panel Glass (#02), with the

exposed attachment on the inside of the shower. (Fig 14)

13. Add silicone to the inside of the installed U-Channel (34”) (#03). Slide the Buttress Return

Panel Glass (#04) back into the U-Channel (34”) (#03) and adjust the glass for level and plumb

using the lines drawn in the previous step for reference. (Fig 13)