Manual

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
Enclosure Diagram
2
PRISM PLUS with Buttress Shower enclosure manual Ver 1 10/2018
©2018 DreamLine. All Rights Reserved
The measurement from
the inside corner of
the hinge panel glass to
the inside corner of the
buttress return panel glass
Product specifications:
!
NOTE: This enclosure must be installed at the model size dimensions shown in Table A on
page 7. Be sure that the correct size shower enclosure has been ordered to fit the finished
dimensions of the base or threshold that the enclosure will be installed upon.
NOTE: The thickness of the finished wall treatment will affect the alignment of the enclosure
upon the threshold.
(W2)*
(W1)
40-1/16”
40-1/16”
22-5/8
22-3/4
23-13/16
The finished buttress wall
should not be more than
22-3/4” at the widest
point, or less than
22-3/4”, otherwise the
buttress return panel will
either extend over the
edge or not reach the
edge, preventing proper
installation.
finished wall surface
finished wall surface
From the finished
wall to the outside
edge of the installed
hinge panel glass
Right-hand buttress panel installation shown
*see note in Step#1
40-1/16”
*40-1/16”
72”
22-5/8”
23-13/16”
22-3/4”
34”
(38”)