Manual

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
20
UNIDOOR-X (STYLE M) manual Ver 2 Rev 1 02/2019
©2019 DreamLine. All Rights Reserved
8
7
Max 3/16”
(4mm)
Max 3/16”
(4mm)
5
6
2
3
1
Ø5/16"
(8mm)
4
outside
Fig 16
Fig 17
Leave space for the decorative cover
when marking the position of the L-Bar
Left-hand bracket installation shown as an example
16. Position the L-Bar™ Assembly (#35) onto the Hinge Panel Glass (#32) as shown and mark its
position on the wall.
Remove the Wall Plate (#35.6) from the L-Bar™. Hold the Wall Plate (#35.6) to the marks on the wall.
Check for level and mark the holes for drilling through the wider, untapped holes. (Fig 16.2)
Drill two Ø5/16”(8mm) holes and insert the Ø5/16” Wall anchors (#35.5). (Fig 16)
17. Attach the Wall Plate (#35.6) to the wall using the ST4.2 x 40 (#35.7) Truss Head Screws.
Re-attach the L-Bar™ (#35.3) to the Wall Plate (#35.6) using the Flat Head Screw M5x14 (#35.8) and
adjust the angle if necessary by using the Wall Plate Adjustment Set Screws (#35.9) (Fig 17.7
and 17.8)
Note that the Flat Head Screws M5x14 (#35.8) must be loosened to allow adjustment with the set
scews and then retightened after adjustment. (Fig 17)