Manual

ManualsBrandsDreamLine ManualsPlumbingE32422534L-04 Unidoor-X 70 1/2 " W x 34 3/8" D x 72" H Frameless Hinged Shower Enclosure in Brushed Nickel

Table Of Contents

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016

7. Slip the U-channel 2 (44”, bottom profile) (29)

onto the Stationary glass (11) and ensure that the

straight end of the U-channel 2 is flush with the

vertical glass edge.

Press the Anti-Water strip (inline panel) (19) onto

the vertical edge of the Stationary glass allowing the

base of the strip to rest on top of the U-channel.

Carefully butt the Stationary glass and Return panel

glass (26) together to form a tight corner from

bottom to top. The Stationary glass will be in front

of the Return panel glass.

While securely holding the two glass panels, attach

the 90° Corner Bracket (30) to the top corner.

Ensure that the 90° Corner Bracket is square and

gaskets are aligned properly before tightening the

glass holding screws.

Temporarily secure the bottom corner of the glass

panels with a generous strip of Painters tape.

See Fig. 8 & 9 for details.

W (+) 1/16"

45°

Fig. 7

outside

inside

Return glass

Stationary glass

outside

inside

Return

glass

Stationary

glass

outside

inside

outside

Painters tape

inside

Fig. 8

NOTE: The top of the Enclosure glass

must be level with the Glass door. By

using a level across the top of both the

In-line Stationary panel glass (11) and

door, height differences can be

measured. The Adjustment spacers (28)

are provided for the Return panel glass

(26) only to compensate for such

differences by inserting them into the

U-Channel 2 (bottom profile) (29).

Please use the correct spacer size that is

needed for your situation.