Installation Guide

“UNIDOOR PLUS (STYLE L)” Ver.1 Rev 4 06/2016
7
H
2. Measure the actual width of your
Stationary glass (11) panel.
NOTE: You will be doing straight cuts for
this return stationary panel installation.
*It may be necessary to remove any
burrs from the cut end of the U-channels
with a metal file before placing the U-
channel onto the glass.
Use a miter saw to rough cut the U-
channel 2 (44”, bottom profile) (29) to
actual width of the glass (+) 1”.
See Fig. 2 & 3 for details.
Fig. 2
W (+) 1"
Fig. 3